Sherwood R-945 Guia de Resolução de Problemas descarregar pdf (Página 19)

ENGLISH

󳀏Allows the multi-channel DTS or Dolby Digital signal to be reproduced through only two speakers or through

headphones.

󳀏If the corresponding digital input for the DTS or the Dolby Digital(AC-3) program sources is selected correctly,

this function can be operated only in the following cases.

■When playing back the Dolby Digital(AC-3) program

sources in the Dolby Digital(AC-3) mode

󳀏Press the STEREO button.

󳀏“ST” and “ DIGITAL” indicators light up, meaning

it enters the 2-CH downmix mode, and then the 5

discrete channels (front L, center, front R, rear L and

rear R) are mixed down to 2 front channels.

󳀏When playing back the Dolby Digital(AC-3) program

sources in the normal stereo mode, it enters the 2-CH

downmix mode automatically.

󳀏When the settings of the center and rear

speakers are adjusted to the NONE mode respectively in

the Dolby Digital(AC-3) mode, if playing back the

Dolby Digital(AC-3) program sources, it can also enter

the 2-CH downmix mode.

󳀏When playback is stopped or interrupted, etc., the 2-CH

downmix mode is not canceled but “ DIGITAL”

and “ST”indicators go off.

󳀏To cancel the 2-CH downmix mode, select the desired

surround mode.

󳀏If the headphones are plugged and the SPEAKER

ON/OFF switch is set to off while playing back the

Dolby Digital(AC-3) program sources in the Dolby

Digital (AC-3) mode, it will enter the 2-CH downmix

mode automatically (but only “ DIGITAL”

indicator lights up still) and if the headphones are

unplugged and the SPEAKER ON/OFF switch is set to

on in the 2-CH downmix mode, it will return to the

Dolby Digital(AC-3) mode.

■When in the DTS mode

󳀏Press the STEREO button.

󳀏“ST” indicator as well as the DTS indicator on the

button lights up, meaning it enters the 2-CH

downmix mode, and when the DTS program

sources are played back, the 5 discrete channels

(front L, center, front R, rear L and rear R) are

mixed down to 2 front channels.

󳀏To cancel the 2-CH downmix mode, select the

desired surround mode or the normal stereo mode.

󳀏If the headphones are plugged and the SPEAKER

ON/OFF switch is set to off in the DTS mode, it

will enter the 2-CH downmix mode automatically

(but only the DTS indicator on the button lights up

still) and if the headphones are unplugged and the

SPEAKER ON/OFF switch is set to on in the 2-CH

downmix mode, it will return to the DTS mode.

Downmixing into 2 front channels

STEREO

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Comentários a estes Manuais

Sem comentários

Sherwood R-945 Guia de Resolução de Problemas Página 19

Comentários a estes Manuais

Manuais e produtos relacionados com Recetor Sherwood R-945